Skip to content
📣 Chat with us for more Discount & Voucher @ +6012 326 4381 | +6018 287 4381 | T&C Apply
📣 Chat with us for more Discount & Voucher @ +6012 326 4381 | +6018 287 4381 | T&C Apply
SS6202F Hot Normal Cold Water Dispenser 4 stage water filter

SS6202F Hot Normal Cold Water Dispenser 4 stage water filter

RM2,299.00 - RM2,299.00
RM2,299.00
RM2,299.00 - RM2,299.00
RM2,299.00

What's in the Box?

  • SS6202F Hot / Normal / Cold Water Dispenser with 4 Stage Water Filter

Overview:

  • Model: SS6202F Hot / Normal / Cold Water Dispenser with 4 Stage Water Filter
  • Type: Pipe-In & Floor Standing
  • Dimension: 350mm (W) x 450mm (D) x 1230mm (H)
  • Power Consumption: Hot 550W / Cold 85W
  • Supply: 230V / 50Hz
  • Water Tank Capacity: Hot: 1.4L (85°C - 95°C) / Cold: 3.2L (6°C - 10°C) / Normal: 1.0L
  • Unlimited Hot / Cold / Normal Water Supply
  • Compressor Cooling Type
  • Automatic Fill-Up System
  • (Hot Water) Safety Child Lock Function
  • Stylish Design Outlook
  • Enhancement Separate Water Tank
  • Stainless Steel Hot Tank and Cold Tank

4 Stages Filter Included (Built-in)

  • Filter 1: Sediment Filter
  • Filter 2: Pre-Carbon Filter
  • Filter 3: Silver-Carbon Filter
  • Filter 4: Post-Carbon Filter
To set up the hot and cold water dispenser, please follow the standard SOP procedure before turning on the power:
1. Open the cover, flush the filters for 5–10 minutes, and reconnect the tubing to the reservoir tank.
2. Turn on the water supply and allow the reservoir tank to fill completely.
3. Release any air/gas lock in the system by pressing and holding the hot water tap until filtered water flows out. Repeat the same process for the cold and ambient taps.

Important:
Failing to follow the proper SOP and switching on the power without water in the system may result in a power trip or heater malfunction.

Installation:

  • FREE Standard Installation: Available in KL and Selangor areas.
  • Shipping Available to Other States.
  • Other state: chat with us at 018-2874381 for further assistance